Convert cubic inches to liters (2024)

FAQs

How do you convert cubic inches to liters? ›

In an imperial and US Customary, one cubic inch is equivalent to 0.016387064 liters, i.e. 1 in³ = 0.016387064 l. Thus, to convert cubic inches to liters, divide the value in cubic inches by 61.0237441 or multiply by 0.016387064.

Up until the early 1980s, engines were measured in cubic inches. One liter equals about 61 cubic inches, so a 350 cubic inch engine is about 5.7 liters.

1 cubic meter is equivalent to 1000 litres. It is a larger unit to measure volume when compared to litre.

350. The 350 cu in (5.7 L), with a 3.48 in (88.39 mm) stroke, first appeared as a high-performance L-48 option for the 1967 Camaro. The exact displacement is 349.85 cu in (5,733 cc).

One liter is equivalent to 61.0237 cubic inches. Thus, by multiplying the engine size by this conversion factor, we can determine the size in cubic inches. The calculation would be 6.2 liters * 61.0237 cubic inches/liter = 378.347 cubic inches.

In terms of displacement, the 4.8L checks in a 293 cubic inches and while down on displacement to the larger 5.3L and 6.0L, the short-stroke 4.8L is an interesting departure from the run-of-the-mill 5.3L.

For 1970, the big-block was expanded again, to 454 cu in (7.4 L), with a bore × stroke of 4+1⁄4 in × 4 in (108.0 mm × 101.6 mm).

The 6.2 L (379 cu in) V8 is the main variant of the Boss engine. The V8 shares design similarities with the Modular Engine family such as a deep-skirt block with cross-bolted main caps, crankshaft-driven gerotor oil pump, overhead cam valve train arrangement, and bellhousing bolt pattern.

Engine sizes are pretty easy to understand as a concept. The more litres it has, the bigger the engine is. Litres, in this case, refers to the capacity an engine has, with the figure referring to the total volume of all cylinders it has. In short, the larger the volume, the more fuel an engine can burn.

How many cubic inches is a 5.7 liter V8? ›

It displaced 5.7 liters (345 cubic-inches for you old-school fans).

An eight-cylinder engine, the V8, is common in pickup trucks, SUVs and sportscars, because these engines create a lot of horsepower and torque and are better suited to tow or haul. It usually has between four and six litres of displacement, depending on the size of the eight cylinders within.

Liters and cubic meters are two units of volume in the metric system. There are 1000 liters in 1 cubic meter.

One thousand liters is called a kiloliter. A kiloliter is equal to 264.172 gallons. One liter is equal to 0.264172, so if you want to find how many gallon there are in 1 kiloliter, just multiply 0.264172 by 1000. (Note: The prefix 'kilo' means one thousand.)

Insert 1 cubic foot into the volume in ft³ part of the equation: Volume in liters = (1 ft³) x 28.317 L/ft. Volume in liters = 28.317 L.

For example, to calculate the volume of a cube, you would use Volume = length times width times height, and your answer will be in cubic centimeters. Convert the answer to litres by dividing the number by 1,000 because there are 1000 cubic centimeters in 1 liter.

427. The highly successful and versatile 427 cu in (7.0 L) version of the Mark IV engine was introduced in 1966 as a production engine option for full-sized Chevrolets and Corvettes. The bore was increased to 4+1⁄4 in (108 mm), with power ratings varying widely depending on the application.