Convert liters to cubic inches (2024)

Home / Volume Conversion / Convert liters to cubic inches

Please provide values below to convert liter [L, l] to cubic inch [in^3], or vice versa.

Liter

Definition: A liter (symbol: L) is a unit of volume that is accepted for use with the International System of Units (SI) but is technically not an SI unit. One liter is equal to 1 cubic decimeter (dm³), 1,000 cubic centimeters (cm³), or 1/1,000 cubic meters (m³).

History/origin: There was a point from 1901 to 1964 when a liter was defined as the volume of one kilogram of pure water under the conditions of maximum density at atmospheric pressure. However, due to the mass-volume relationship of water being based on a number of factors that can be cumbersome to control (temperature, pressure, purity, isotopic uniformity), as well as the discovery that the prototype of the kilogram was slightly too large (making the liter equal to 1.000028 dm³ rather than 1 dm³), the definition of the liter was reverted to its previous, and current definition.

Current use: The liter is used to measure many liquid volumes as well as to label containers containing said liquids. It is also used to measure certain non-liquid volumes such as the size of car trunks, backpacks and climbing packs, computer cases, microwaves, refrigerators, and recycling bins, as well as for expressing fuel volumes and prices in most countries around the world.

Cubic inch

Definition: The cubic inch (symbol: in³) is a unit of volume in the Imperial and United States customary systems of measurement. It is the volume of a cube with measurements 1 in × 1 in × 1 in. It is equal to 16.387064 cm³ or mL.

History/origin: The cubic inch is derived from the inch, a unit of length within the imperial and US customary systems of measurement. Since the 1950s and 1960s, with the adoption of the international yard, the inch has been defined as exactly 2.54 cm.

Current use: The cubic inch and cubic foot are still used in the United States, and to some extent in the United Kingdom. However, SI (International System of Units) units of measurement are also widely used throughout these countries.

In the US, the automotive and aircraft industries in particular use the cubic inch to some extent, though the SI derived or SI accepted units of volume (liter, milliliter, and cubic meter) are also used.

In the UK, automotive model numbers are sometimes denoted in cubic inches.

Liter to Cubic Inch Conversion Table

Liter [L, L]	Cubic Inch [in^3]
0.01 L, l	0.6102374409 in^3
0.1 L, l	6.1023744095 in^3
1 L, l	61.0237440947 in^3
2 L, l	122.0474881895 in^3
3 L, l	183.0712322842 in^3
5 L, l	305.1187204737 in^3
10 L, l	610.2374409473 in^3
20 L, l	1220.4748818946 in^3
50 L, l	3051.1872047366 in^3
100 L, l	6102.3744094732 in^3
1000 L, l	61023.744094732 in^3

How to Convert Liter to Cubic Inch

1 L, l = 61.0237440947 in^3
1 in^3 = 0.016387064 L, l

Example: convert 15 L, l to in^3:
15 L, l = 15 × 61.0237440947 in^3 = 915.356161421 in^3

Popular Volume Unit Conversions

liters to gallons

gallons to liters

ml to cups

cups to ml

tablespoons to cups

cups to tablespoons

ml to l

l to ml

teaspoon to ml

ml to teaspoon

liters to quarts

quarts to liters

cups to liters

liters to cups

pint to ml

ml to pint

cc to ml

ml to cc

cc to oz

oz to cc

cubic feet to gallon

gallon to cubic feet

cubic feet to cubic yards

cubic yards to cubic feet

Convert Liter to Other Volume Units

Liter to Cubic Meter

Liter to Cubic Kilometer

Liter to Cubic Centimeter

Liter to Cubic Millimeter

l to ml

liters to gallons

liters to quarts

liters to pints

liters to cups

Liter to Tablespoon (US)

Liter to Teaspoon (US)

FAQs

How many cubic inches is a 6.2 liter Chevy? ›

To convert engine displacement measurements from one unit to another you can use the following chart. So, 6.2L is (roughly) equivalent to 378 cubic inches.

Get More Info ›

What is the formula of liter to cubic inches? ›

To convert a measurement in liters to a measurement in cubic inches, multiply the volume by the following conversion ratio: 61.023744 cubic inches/liter.

Read On ›

How many liters is a cubic inch displacement? ›

In an imperial and US Customary, one cubic inch is equivalent to 0.016387064 liters, i.e. 1 in³ = 0.016387064 l. Thus, to convert cubic inches to liters, divide the value in cubic inches by 61.0237441 or multiply by 0.016387064.

Discover More ›

What is 1 liter equal to 61.02 cubic inches? ›

A liter is 1000 ml, or 1000 cc (cubic centimeters). Since 1 inch = 2.54 cm, 1 liter = 1000 cc * (1 inch/2.54 cm) ^ 3 = 61.02 cubic inches.

How many liters is a 454? ›

454. For 1970, the big-block was expanded again, to 454 cu in (7.4 L), with a bore × stroke of 4+1⁄4 in × 4 in (108.0 mm × 101.6 mm).

Read On ›

How many liters is a 427 engine? ›

The 390 HP L36 and 425 HP L72

It was during this year that the Corvette was offered with not one, but two different variants of the robust 427 cubic-inch (7.0L) V8. In its most potent form (L72), the 427 officially produced 425 HP.

See Details ›

How many cubic inches is a 7.3 diesel? ›

The 7.3 Powerstroke is a two-valve behemoth which measures in at 444 cubic inches and has a maximum stock power rating of 275hp and 525lb. ft. of torque.

Know More ›

How many liters are in 1 gallon? ›

3.78541

View Details ›

When did they switch from cubic inches to liters? ›

The domestic auto manufacturers metricated in the 70's, and only provide the engine size in liters. Most Americans won't bother to convert; 40+ years ago, cubic inches were used. The owners manual does provide the fuel capacity in both gallons and liters, but who really reads the owners manual.

Know More ›

How many liters is a 350 engine? ›

350. The 350 cu in (5.7 L), with a 3.48 in (88.39 mm) stroke, first appeared as a high-performance L-48 option for the 1967 Camaro. The exact displacement is 349.85 cu in (5,733 cc).

Find Out More ›

How many cubic inches is a 5.3 l Chevy engine? ›

But 5.3l is converted to 323.429 cubic inches.

Discover More ›

What cubic inch is a 6.0 ls? ›

In stock form, GM derives 6.0L, or 364 cubic inches, from a 4.000˝ bore and a 3.622˝ stroke crankshaft.

How many gallons in a cubic liter? ›

There are 0.264172 gallons per liter. Therefore, we just multiply the liters by 0.264172 (or divide by 3.785 since 1 3.785 = 0.2642 ). The liters to gallons formula is given as, Gallons liters.

Find Out More ›

How do I calculate cubic inches? ›

Measure the object's length, width, and depth in inches. Then, multiply the length, width, and depth together to find the object's volume in cubic inches. For instance, say the object is 50 in long, 25 in wide, and 20 in deep. 50 x 25 x 20 = 25,000, so the object's volume is 25,000 cubic inches.

Read On ›

How many 16 oz is in a liter? ›

So, a liter is roughly equivalent to about 2.11 (rounded to two decimal places) 16 oz bottles of water.

Read On ›

Is a 6.2 Chevy a big block or small block? ›

The 6.2L Chevy engine is the small-block V8 that's used in most of Chevy's performance vehicles. It's also used in all Chevy trucks andche its large SUVs.

Discover More Details ›

How many miles per gallon does a Silverado 6.2 liter get? ›

2022 Chevrolet Silverado

EPA Fuel Economy	Driver MPG	MSRP
2022 Chevrolet Silverado 4WD 6.2 L, 8 cyl, Automatic 10-spd, Premium Gasoline
17 MPG 15 20 combined city/hwy city hwy 5.9 gal/100 mi	NA	$39,200 – $63,600
408 miles Total Range	NA	$39,200 – $63,600
2022 Chevrolet Silverado 4WD 5.3 L, 8 cyl, Automatic 8-spd, Regular Gasoline

80 more rows

View Details ›

What is the horsepower of a 6.2 liter Chevy engine? ›

6.2-liter EcoTec3 V8

A stronger version of the 5.3-liter V8, the 6.2-liter engine puts out 420 horsepower and 460 pound-feet of torque. Make short work of tall tasks at the dig site and ensure you have total control of your drive.

Explore More ›

What is the towing capacity of the 6.2 liter Chevy engine? ›

6.2L V8 Engine. 420 hp. 460 lb-ft of torque. Maximum Towing Capacity: 12,200 pounds.

Know More ›